Safety; Intended Use; Personnel Qualification - WIKA 700.01 Manual De Instrucciones

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that
the appropriate pressure gauge has been selected in terms of
measuring range, design and specific measuring conditions.
Observe the selection and installation recommendations for
pressure gauges in accordance with EN 837-2.
Check the compatibility with the medium of the materials
subjected to pressure!
In order to guarantee the measuring accuracy and long-term
stability specified, the corresponding load limits must be
observed.
Non-observance can result in serious injury and/or damage to
the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.

2.1 Intended use

These differential pressure gauges are used for monitoring differential pressures
in hazardous areas of industrial applications.
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage
to equipment.
■
WIKA operating instructions differential pressure gauge with piston per ATEX
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualifications described below.
GB
5