Safety At The Workplace; Electrical Safety - IKRA EGN 2500 Manual De Instrucciones

1. Intended Use
This shredder is intended for chopping fibrous and wood-
en garden waste into compostable material.
WARNING: For your own safety, please read this
handbook and the general safety instructions
thoroughly before operating the unit. If you give
the unit to someone else, always include this in-
struction manual.
2. Package Contents
• Remove the packaging material.
• Remove the packaging and/or transportation protec-
tion (if present).
• Verify that the delivery is complete.
• Check the unit and accessories for transportation
damage.
• If possible, store the packaging until the end of the
warranty period. After that period, please dispose of
the packaging in an environmentally friendly manner.
WARNING: The packaging material is not a play
toy! Please keep plastic bags out of the reach of
children. There is a risk of choking.
Machine
2x wheels
2x wheel covers
Collection bin
Axle
2x Threaded spacers
2x washers
2x nuts
Open-end spanner
Flat push rod
If parts are missing or damaged, contact your
dealer.
3. Explanation of symbols
Attention: Environmental Protection! This
device may not be disposed of with general/
household waste. Dispose of only at a desig-
nated collection point.
Warning / Danger!
Read these instructions for use carefully
Caution!
Rotating electrical too!
Warning! Do not put hands or feet under the
cover of the machine when it is running
GB | Operating Instructions
4. General safety information for power tools
Warning! Read all safety-related information and safety
instructions! Failure to observe the safety information
and instructions may result in electric shock, burns and/
or severe injury. Keep the safety information and instruc-
tions for future reference. The term 'power tool' as used
in the safety information and instructions includes both
mains-operated tools (with power cord) and battery-
operated tools (without power cord).

4.1 Safety at the workplace

• Keep your working area clean, tidy and well-lit. Dis-
• Do not operate the power tool in potentially explosive
• Keep children and other persons away while you are

4.2 Electrical safety

• Before switching on, make sure that the voltage of
• The mains plug of the power tool must fit into the
• Avoid physical contact with earthed surfaces as
• Keep the tool out of the rain or moisture in general.
• Do not use the cord to carry or hang up the tool or to
GB-2
Keep spectators away.
Warning!
Beware of objects being flung out.
Do not use the device in humid weather and
store it in a dry location.
Disconnect mains plug before carrying out
any repairs!
If the cable is damaged, disconnect from the
mains immediately and replace cable!
Wear eye and ear protection devices when
operating this device.
order and poorly lit working areas may result in ac-
cidents.
environments containing combustible fluids, gases or
dusts. Power tools generate sparks that may ignite dusts or fumes.
operating the power tool. Distractions may result in the
operator losing control over the tool.
your electricity supply is the same as that indicated on
the rating plate.
mains socket. The plug must not be modified in any
way. Do not use adapter plugs/connectors in combi-
nation with tools with protective earthing. Unmodified
plugs and fitting sockets reduce the risk of electric
shock.
pipes, heaters, ovens and refrigerators. There is an
increased risk of electric shock if your body is earthed.
The penetration of water into a power tool increases
the risk of electric shock.