Please unfold page 3. Then you will always see the
GB
operating elements and connections described.
Contents
1
2
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . 13
3
Applications . . . . . . . . . . . . . . . . . . . . . . . . . 13
4
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5
6
7
7.1 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8
9
10
10.1.2 Operation with 6, 9, 15, 27,
12
1 Operating Elements and Connections
1.1 Light effect panel
1 Fixing plate for screwing on another RGBL-120DMX
2 Mounting brackets for wall or ceiling mounting of
the unit
3 LED DMX lights up when DMX control signals are
present at the DMX INPUT (15)
4 LED MASTER lights up in the master mode
(operation without DMX controller or with the re-
mote control LC-3)
5 Button MENU to call the adjusting menu and to
select the menu items
6 Buttons DOWN and UP to change an adjustment in
the menu
7 Button ENTER to activate a menu item and to store
an adjustment
8 LED SOUND lights up shortly for music control via
the microphone (12)
9 LED SLAVE lights up in the slave mode
(control by another RGBL-120DMX)
10 Display
11 Control SENSITIVITY for the sensitivity of response
in case of music control via the microphone (12)
12 Microphone for music control
13 Connection jack for the remote control LC-3
14 DMX signal output (3-pole XLR) for connection to
the DMX input of another DMX light effect unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+
15 DMX signal input (3-pole XLR) for connection of a
light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
16 Support for the mains fuse
Only replace a blown fuse by one of the same type.
17 Mains jack for connection to a socket (230 V~/
50 Hz) via the supplied mains cable
1.2 Remote control LC-3
The remote control is available as an accessory and
not supplied with the RGBL-120DMX.
18 Button STAND BY to switch off the LEDs
19 Button FUNCTION to select different functions
depending on the function mode selected with but-
ton MODE (20) [
20 Button MODE to change between:
- show programme No. 0 (
The LED of button MODE does not light up.
- Function colour radiator: nine preset colours and
a colour which has been manually adjusted can
be selected with button FUNCTION.
The LED of button MODE lights permanently.
chapter 6.3]
chapter 6.1.1)