TRAPP Master 500L Manual De Instrucciones página 27

Warning!
All and every maintenance or
cleaning shall be done with the
equipment turned off and
unplugged.
Installation of the protection device
✔
Before switching on and using the lawn
mower/trimmer, install the protection
device.
✔
TRAPP lawn mowers/trimmers are already
assembled when delivered with the exception
of the protection device. It is conditioned
together with the equipment in the same
package. To assemble it, turn the lawn
mower/trimmer upwards (Fig. 1)
✔
Place the protection device as per drawing,
and fit it in lock (3) (Fig. 2). Press it to the
body (4), put screws (2) in position and
tighten them (Fig. 1).
✔
If you use the equipment without the
protection device, you will not be entitled
to the warranty.
1 Protection device
2 Screws
3 Lock
4 Body
Fig. 1
Fig. 2
Use and Operation Instructions
Adjustment of adjustable handle
Master 500L, Master 700L,
Master 800 Plus,
Master 1000 Plus, Master 800
and Master 1000L
✔
When in use, the equipment shall
always remain suspended, cutting the
grass above the ground. For your
convenience, the height of the
adjustable handle can be adjusted in
the following way:
1. Loosen the wing nut that fixes the
adjustable handle to the bar.
2. Slide the adjustable handle upward
or downward to the desired height.
3. Tighten the wing nut.
Adjustable
handle
Wing nut
Bar
25