New Construction Installation Instructions - Utilitech 00761 Manual De Instrucciones

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
1. Determine mounting method.
A. If the joist space is from 14 in. to 18 in.,
continue to Step 2 - 4 on Page 7 - 8.
B. If the joist space is from 18 in. to 28 in.,
proceed to Step 5-6 on Page 8.
2. Insert two hanger bars (C) to the housing (A), ensuring
the hanger bars (C) are snug against the opposite joist
you chose.
3. Use long screws (AA) to screw the housing (A) directly
to the joist using keyhole mounting tab holes or holes on
the inside of the housing (A). Choose the side that best
works for the installation area. One side of the housing
(A) has a foam insert. Remove and discard this foam
insert when choosing that side.
Note: The bottom edge of the housing (A) must be flush
with the finished ceiling.
Hardware Used
• Long Screw
9i))) ) ) ) ) ) ) ) ) ) ) ) ) )
I ))) )lllll)JJ>
x 3
or 4
7
•
3 holes
~
UTILITECH' ]
Lowes .com ~
- · - :