Utilitech 00761 Manual De Instrucciones página 20

FINAL INSTALLATION INSTRUCTIONS
5. Plug the wire connector from the light kit pan (E) into the
receptacle in the housing (A).
6. Position the light kit pan (E) on the housing (A), aligning
the two holes on the light kit pan (E) with the threaded
rods on the motor assembly (B). Install previously
removed washer (EE) and hex nut (DD) on the center
threaded rod of the motor assembly (B) and tighten until
the light kit pan (E) is flush with the finished ceiling.
Hardware Used
I)
Hex Nut
l(ij
~Washer
@
X
1
X
1
7. Install two bulbs (K) into the socket on the light kit pan
(E).
20
~UTILITECH" J
Lowes .com
\:1 - · -