Safety Harness - Chicco Polly 2in1 Instrucciones De Uso

to prevent the formation of rust.
Maintenance
Keep the highchair in a dry place.
To avoid friction that may prevent the correct operation of the
Highchair, ensure that all the movable plastic parts located along
the metal frame are free from dust, dirt or sand.
Lubricate only if necessary, with a light application of a silicone
based lubricant between the components
INSTRUCTIONS FOR USE
HOW TO ASSEMBLE / OPEN THE HIGHCHAIR
WARNING: When opening the highchair, ensure that your child,
or other children, are at a safe distance. Ensure that during these
operations, the movable parts of the highchair do not come into
contact with your child.
1. Fix the legs to the highchair frame as shown in the diagram (dia-
gram 1A - diagram 1B). WARNING: the ends of the front and rear
legs have a different shape to avoid errors in the assembly phase.
Rear legs: keep the two locking buttons, located at the base of the
frame, pressed down and insert the legs into the structure. The
parts are locked only when the two locking buttons come out from
the holes on the legs, and an audible click is heard, signalling that
the legs are securely fitted (diagram 1A).
Front legs: keep the two locking buttons located at the base of the
frame pressed down and insert the legs. The parts are correctly
locked only when the two locking buttons come out from the holes
on the legs, and an audible click is heard, signalling that the legs
are securely fitted
(diagram 1B).
2. Stand at the back of the Highchair and hold the two joints, then
press the open/close buttons. At the same time, open the High-
chair legs using your foot, until an audible click is heard, signalling
that the legs are locked in the open position (diagram 2).
3. Raise the seat by holding the upper part of the backrest and
pull it upward, until the desired height is reached (diagram 3). The
Highchair can be adjusted to 7 height positions.
4. Lower the seat and leg rest with your hands (diagram 4). The seat
is fixed to the frame by a fastening device.
5. Press the side adjustment buttons and lower the leg rest in a
vertical position (diagram 5).
6. Lower the armrests by pressing the two buttons located at the
rear of the armrests (diagram 6)
WARNING: The armrests must always be maintained in a horizon-
tal position. The armrests can be maintained in a vertical position
only when closing the Highchair.
7. Fix the fabric covers to the Highchair frame:
Polly Version
A. Fit the fabric cover to the Highchair frame by sliding the safety
harness and D-Rings into the appropriate loops (diagram 7A).
B. Slide the lap belt through the D-Rings and insert the clips into
the buckle (diagram 7B)
C. Fit the spring catches (diagram 7C).
Polly Double Phase Version:
D. Fit the upper fabric cover to the Highchair frame by sliding
the safety harness and D-Rings in the appropriate loops (diagram
7D).
E. Slide the lap belt through the D-Rings and insert the clips into
the buckle (diagram 7E)
F. Fit the spring catches (diagram 7F).
8. Insert the footrest, turn it until the use position is reached, and
lock it (diagram 8). The footrest can be adjusted to 3 positions.
The child can now be seated in the Highchair.
9. Fit the rigid crotch strap to the activity tray (diagram 9A, dia-
gram 9B). The design of the crotch strap attachment only allows
one type of assembly operation.
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the Highchair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the Highchair.
The Polly Highchair version comes with a single padded cover,
while the Polly Double Phase version has a double padded cover.
The fabric covers of both Highchair versions are padded, and can be
removed and washed.
To remove the cover from the Highchair, repeat, in the reverse or-
der, the operations described to fit the fabric cover to the frame
(Polly: 7A-7C version, Polly Double Phase version: 7D-7F). With the
Polly Double Phase version, the same operations carried out with
the upper padding must be carried out also with the lower pad-
ding.
WARNING: Never use the highchair without the fabric cover.
WARNING: When using the Polly Double Phase Highchair, never
use the Highchair only with the upper fabric cover or with the pad-
ding fitted to the frame in the reverse order.

SAFETY HARNESS

WARNING: The use of the safety harness and fabric crotch strap is
necessary to guarantee the safety of your child. WARNING: The ac-
tivity tray alone does not guarantee the safety of your child. Always
use the SAFETY HARNESS!
The highchair has a 5-point safety harness.
10. Release the safety harness (diagram 10)
11. Place the child in the highchair and fasten it with the safety
harness (diagram 11)
The safety harness can be adjusted to two height positions.
FITTING / ADJUSTING THE ACTIVITY TRAY
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the Highchair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the Highchair.
The activity tray can be adjusted to 4 positions.
12. Hold the activity tray in your hands (diagram 12).
13. Press and hold the bottom button (X), lower the activity tray
into place checking that the armrests (H) slot into the guides lo-
cated under the activity tray (diagram 13).
14. Move the activity tray until the desired position is reached and
release the button. If the activity tray is not automatically locked
on the armrests, move the activity tray until a click is heard, signal-
ling that the tray is locked (diagram 14).
WARNING: Always ensure that the tray is locked correctly to the
armrests before use.
WARNING: Never leave the tray fitted in a position in which the
danger signs are visible on the armrests: IT IS NOT safe!
15. To remove the tray, pull it in an outward direction while keeping
the lower button pressed.
16. The Highchair has an activity tray cover. This can be fixed /
removed from the activity tray by a pressure device (diagram 15).
WARNING: Always ensure that the activity tray cover is correctly
fitted to the tray during use.
17. The activity tray cover can be used as a convenient "table cloth
saving tray" if the child eats sitting directly at the table with its
parents (diagram 16).
ADJUSTING THE HEIGHT OF THE HIGHCHAIR
The Highchair can be adjusted to 7 height positions.
18. To raise the seat: Hold the upper part of the backrest and pull it
upward, until the desired height is reached (diagram 17).
19. To lower the seat: Press the two side buttons simultaneously
and lower the seat, until the desired height is reached (diagram 18).
WARNING: Do not carry out this operation with the child sitting
in the Highchair.
23
FABRIC COVER