Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Optional
Instructions If Addressing Transport
Clearnace Issues
1. Remove both stabilizing leg covers (A) and toe grille (B).
Both snap off.
2. Remove both stabilizing brackets (C)with 3/8"hex nut
driver.
A
To Replace Freezer Drawer
IMPORTANT: Two individuals may be required to complete
this procedure.
1.
Extend both interior rail assemblies to full length on
each side of cabinet.
4.
insert
hook tab (D) into notch
(E) at 45 ° angle.
Insert
tab (F) into notch
(G) by lowering
handle
end of
assembly.
Replace Phillips screws on both rail extensions.
F
6.
Replace bottom basket (H) by placing basket into rail
guides (I).
2.
Locate notches(A) in both interior rail extensions.
3.
Align tabs on outside edge of drawer rail assemblies
(B) with notches in both rail extensions (C).
f
I
C
7.
Slide top basket into upper compartment.
Optional
Instructions
If Addressing
Transport
Clearance Issues
1. Replace both stabilizing brackets (A)with 3/8"hex nut
driver.
2.
Replace toe grille (B) and both stabilizing leg
covers (C). See markings on inside of toe grille to
insure proper placement.
• Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
.C
Capítulos
Tabla de contenido
