Sears Kenmore 385.16231 Manual De Instrucciones página 94

(_ Mark for placement of buttonhole
@ Starting point
@ Slider
_There should be no gap
(_) Spring holder
(_ Difference
[] Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
into the fabric to the starting point.
Then lower the automatic buttonhole foot.
Depress the foot control to sew a buttonhole. The
machine will stop when the buttonhole is completed..
E]Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks. Cut the
opening with the buttonhole opener.
'"1
®
--.,
[_To sew another buttonhole, you must reset the machine.
Reset by shifting the stitch selector in either direction,
(_or(_, to the next setting. Then shift the selector back
to the buttonhole setting '!] 'L
f
[]
[] When finished, push the buttonhole lever up as far as it
will go.
f
[]
82