Tools Needed For Assembly; Controls And Functions - WAGNER Paint Crew Plus Manual Del Usario

Components
The shipping carton for your painting system contains the
following:
• Spray gun with filter and
spray tip assembly
• 25', 1/4" diameter
pressure hose
• Sprayer base
• Removeable hopper and
hopper lid
* Do not discard. Stored in sprayer base.
** Some units may include additional items.
On/OFF Switch .............................. The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Spray Gun ...................................... The spray gun controls the delivery of the fluid being pumped.
Spray Hose ..................................... The spray hose connects the gun to the pump.
Return Tube ................................... Fluid is sent back out through the return tube to the hopper when PRIME/SPRAY knob is in PRIME
PRIME/SPRAy Knob ...................... The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube
Pressure Control .......................... The pressure control function is also controlled by the PRIME/SPRAY knob. The pressure control
Removeable Hopper ...................... The hopper can be removed for easy emptying and cleaning. It can be removed when empty or
Capacity.......................................... 2 1/2 gallon removable hopper.
Power Source................................. 1/2 Hp universal motor.
Power Requirement ....................... 15 amp minimum circuit on 115 VAC, 60 Hz current.
Generator Requirement ................ 8000 Watt.
Safety Features .............................. Spray gun trigger lock and pressure diffuser; built-in safety guard; PRIME/SPRAY knob for safe
Capability ..................................... Sprays a variety of paints, oil base, latex, primers, stains, preservatives and other nonabrasive
Components and Description
• Two wheel assemblies
• Hose bracket
• Handle
• Instruction manual
• Inlet valve pusher tool*
• Inlet valve removal tool*

Controls and Functions

position.
when set to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for
PRIME and SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the system (see Pressure
Relief Procedure, page 7).
regulates the amount of force the pump uses to push the fluid and can be adjusted for desired
spray pattern.
when filled with material. IMPORTAnT: Do not exceed 2 1/2 gallons. The hopper will not
stand on its own. Make sure it is empty of all liquids before setting it down.
pressure release.
materials, including pesticides and liquid fertilizers. This pump should not be used with textured
materials, block filler, lacquers, industrial enamels, or asphalt sealer or materials containing
HHC. See coating supplier if flash point is not listed on the container.

Tools needed for Assembly

• Two adjustable wrenches
• Extension cord (refer to Important Electrical
Information, page 3).
Specifications
5 English