Safety Instructions For Spray Guns; Technical Data - WAGNER W 550 Manual De Instrucciones

GB
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.

Safety Instructions for Spray Guns

•
D o not use the spray guns to spray flammable substances.
•
T he spray guns are not to be cleaned with flammable solvents.
•
T he device may not be used in workplaces covered by the explosion-protection regulations.
•
T here must be no sources of ignition such as, for example, open fires, smoke of lit cigarettes,
cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the vicinity during spraying.
•
D o not spray any substances whose hazard potential is not known.
•
B efore working on the spray gun remove the power plug from the socket.
•
C aution against dangers that can arise from the sprayed substance and observe the text and
information on the containers or the specifications given by the substance manufacturer.
Recommendation: Wear a breathing mask and safety glasses when spraying.
CAUTION - DANGER OF INJURY!
Never point the spray gun at yourself, at other people or at animals.
Attention! Never operate the device if the nozzle seal is either
damaged or missing. If the nozzle seal is either missing or damaged
liquids can enter the device and increase the risk of an electric shock.
Check the nozzle seal before each use.
•
W hen working with the W 550 indoors as well as outdoors ensure that no solvent vapors are
sucked in by the spray gun.
•
W hen working outdoors, be aware of the wind direction. Wind can carry the coating substance
across greater distances - thus causing damage. When working indoors, provide for adequate
ventilation.
•
D o not let children handle the device.
•
N ever open the device yourself in order to carry out repairs in the electrical system!
•
T he units may only be used with a functional valve. If paints rises in the ventilating hose
(Fig. 1, item 11) do not operate the unit further! Dismantle and clean the ventilating hose,
valve and diaphragm and replace the diaphragm if necessary.
•
D o not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that all safety
regulations are fulfilled.
Max. viscosity
Power source
Power consumption
Atomizing output:
Double insulation
Sound pressure level
Oscillation level
Weight
24

Technical Data

90 DIN-s
~
220 V , 50Hz
280 W
65 W
74 dB (A)
< 2,5 m/s²
1,3 kg
W 550