Mx Onda MX-PIP2195 Manual De Instrucciones página 66

At the base of the plate should NEVER put tea towels, dishcloths or other
objects that may obstruct the holes in the fan, thus preventing proper
ventilation and cause overheating of the circuits, so act security protections.
Note:
Remember that the fan remains in operation for 3 minutes after turning off
the plate. This is normal and does not indicate a malfunction.
INSTALLATION
1. Place the plate on a stable, level surface, away from hot areas with high
humidity or near flammable materials (oil, curtains, cloths, etc.).
2. To ensure adequate ventilation allow at least 30 cm on each side of the
plate. DO NOT obstruct the ventilation slots on both sides and in the back
of the plate and how the holes in the fan (located at the base of the plate).
3. Fully unroll the cord and plug the appliance plug into the mains. The buzzer
will "beep" to warn that the board has been plugged into the power outlet.
CONTROLS AND ELEMENTS
9
1. On / off button
2. Function selector button
3. Led screen
4. Increase button
5. Decrease button
6. LED indicator of selected power mode
7. LED indicator of the selected temperature mode
8. LED indicator of timer mode activated
9. Jump button at maximum power or temperature
10. Jump button at minimum power or temperature
10 4
7 8
6
3
7
2
5
1