Maintaining Your Water System
Your Kinetico water system is engineered to provide you with quality
water without requiring extensive maintenance. However, some routine
maintenance is necessary to keep your system working properly.
Changing the Filter
Your Kinetico system uses an in line filter to remove solid material from
the inlet water supply. Periodically, the filter cartridge will require
replacement. This should occur when the water pressure in the home
begins to gradually decrease. The frequency of the filter change is
determined by the amount of water used and the solid material content
of your water supply.
Procedure
1. Turn off the feed water to the filter by turning the by-pass valve
the BY-PASS position*.
2. Slowly turn the handle on the pressure relief valve
position**. Allow at least one minute for system to depressurize and to
minimize spillage.
Open
2
Closed
5
On
1
Off
3
4
1
to the OPEN
2
6
to
1