Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- Form the habit of checking to see that keys and adjusting wrenches are removed from the tool
before turning it on.
17- Avoid unintentional starting
- Ensure switch is in "off" position when plugging in
18- Use outdoor extension leads
- When the tool is used outdoors, use only extension cords intended for outdoor use and so marked.
19-Stay alert
- Watch what you are doing, use common sense and do not operate the tool when you are tired.
20- Check damaged parts
- Before further use of tool, it should be carefully checked to determine that it will operate properly
and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
- A guard or other part that is damaged should be properly repaired or replaced by an authorized
service centre unless otherwise indicated in this instruction manual.
- Have defective switches replaced by an authorized service centre.
- Do not use the tool if the switch does not turn it on and off.
21- Warning
- The use of any accessory or attachment other than one recommended in this instruction manual
may present a risk of personal injury.
22- Have your tool repaired by a qualified person
-This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable danger to the
user.
23- If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
24- For tools intended to be connected to a water supply:
– for tools provided with a PRCD: Never use the tool without the PRCD delivered with the tool,
– for tools provided with an isolating transformer: Never use the tool without the transformer
delivered with the tool or of the type as specified in these instructions,
– Replacement of the plug or the supply cord shall always be carried out by the manufacturer of the
tool or his service organisation,
– Keep water clear off the electrical parts of the tool and away from persons in the working area.
SPECIFIC SAFETY RULES
1. Do not use saw blades which are damaged or deformed.
2. Replace the table insert when worn.
3. Use only saw blades recommended by the manufacture.
4. Do not use saw blades made of high-speed steel.
5. Always wear the hearing protection to reduce the risk of induced hearing loss.
6. Always wear the eye protection when use the tool.
7. Always wear a dust mask to reduce the risk of inhalation of harmful dust.
8. Wear gloves when handle saw blades (saw blades shall be carried in a holder wherever practicable)
and rough material.
9. Connect the saw to a dust collecting device when sawing wood.
10.Select the correct saw blade for the material to be cut.
11.Do not use the saw to cut other materials than those recommended by the manufacture.
12.Do not use the saw without the guards in position, in good working order and properly maintained.
13.Keep the floor area around the machine level, well-maintained and free of loose materials e.g.
wood chips and timber off cuts.
33
Tabla de contenido
