Polar CK640 Manual De Instrucciones página 7

Ocultar thumbs Ver también para CK640:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Insert the food probe
Before selecting which cycle to use, the probe must be inserted into the food. This allows the internal
temperature of the food to be measured.
It is important that the probe is correctly connected to the unit.
Note: To prevent bacterial contamination or contamination of any other
biological nature, the needle probe must be disinfected after use.
Control Panel
Timed
Chilling LED
Set-Temperature
Chilling LED
Storage LED
In the "on" state, during normal operation, the display shows:
the amount of time remaining for a timed blast chilling operation, if this is ongoing
the temperature measured by the pin probe if a set-temperature chilling operation is ongoing
the temperature of the cabinet, if storage is ongoing.
In "stand-by" mode, during normal operation, the display shows the temperature of the cabinet for ½
second every 3 seconds.
Signals
LED
Timed Chilling LED
If on and the LED
If on and the LED
If flashing, a timed chilling and storage cycle will have been selected
Set-temperature chilling LED
If on and the LED
If on and the LED
be ongoing
If flashing, a set temperature chilling and storage cycle will have been selected
CK640_ML_A5_v4_20200728.indb 7
CK640_ML_A5_v4_20200728.indb 7
Alarm LED
Minute LED
Message
is off, a timed chilling operation is ongoing
is also on, a post timed-chilling storage operation is ongoing
is off, a set-temperature chilling storage operation is ongoing
is also on, a post set-temperature chilling storage operation will
UK
Degree
Celsius LED
Degree
Fahrenheit LED
7
2020/7/28 17:38
2020/7/28 17:38
Tabla de contenido
loading

Tabla de contenido