Tabla De Contenido; Features; Placement - Yamaha YST-SW45 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
CONTENTS
Caution ....................................................................... 2
Features ..................................................................... 3
Placement .................................................................. 3
Connections ............................................................... 4
Controls and their functions ....................................... 7

FEATURES

• This subwoofer system employs Advanced YAMAHA Active
Servo Technology which YAMAHA has developed for
reproducing higher quality super-bass sound. (Refer to page
10 for details on Advanced YAMAHA Active Servo Technol-
ogy.) This super-bass sound adds a more realistic, theater-
in-the-home effect to your stereo system.
• This unit can be added easily to your existing audio system
by connecting to either the speaker terminals or the line
output (pin jack) terminals of the amplifier.

PLACEMENT

Å
(
: subwoofer,
One subwoofer will have a good effect on your audio system,
however, the use of two subwoofers is recommended to obtain
more presence.
If using one subwoofer, it is recommended to place it on the
outside of either the right or the left main speaker. (See fig. Å.)
If using two subwoofers, it is recommended to place them on
the outside of each main speaker. (See fig. ı.) The placement
shown in fig. Ç is also possible, however, if the subwoofer
system is placed directly facing the wall, the bass effect may
die because the sound from it and the sound reflected by the
wall may cancel. To prevent this, face the subwoofer system
obliquely to the wall as in fig. Å or ı.
Note
There may be a case that you cannot obtain enough super-
bass sounds from this unit when listening at the middle of the
room. This is because "standing waves" have developed
between two parallel walls and the bass sounds are canceled.
In such a case, face the unit obliquely to the wall. It also may
be necessary to break up the parallel surfaces by placing
bookshelves etc. along the walls.
ı
: main speaker)
Adjusting volume ........................................................ 8
Troubleshooting ........................................................ 11
Specifications ........................................................... 11
• For the effective use of this unit, this unit's super-bass sound
must be matched to the sounds of your main speakers. You
can create the best sound quality for various listening
conditions by using the HIGH CUT control.
• The Automatic Standby function saves you the trouble of
pressing the STANDBY/ON button to turn the power on and
off.
Ç
Use the rubber pads
Put the provided rubber pads at the four corners on the bottom
of the subwoofer unit to prevent the subwoofer unit moving due
to vibrations etc.
3

Hide quick links:

Tabla de contenido
loading

Tabla de contenido