Work Pro Digiline Serie Manual De Usuario página 24

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Equalizer Output
In this example we have created an equalization filter at Output 3 (Output Channel = 3)
We employed the 1st band (Band Index = 1), so we started on the left side of
response curve (See 3.1.1 EQ on page 17 for additional information).
We selected Low Shelving filter type (Type = 4). This number is determined by the order
occupies within the filter type drop-down. CONSIDERING THAT THE FIRST FILTER (BYPASS)
HAS VALUE 0.
Bypass = 0, Peak = 1, Low Pass = 2, HighPass = 3, Low Shelving = 4
High Shelving = 5, Band Pass = 6, Notch = 7, All Pass = 8
Parameters Frequency (in Hz), Gain (in dB) and Q, allow to adjust the values of the filter created
CrossOver
In this case we have created two crossover filters at Output 3 (Output Channel = 3)
We have created a Butterworth type high-pass filter ( high pass type = 0) and another Linkwith-Riley as
low pass filter (Low pass type = 3). The nomenclature of these filters is due to the following table:
HIGH PASS TYPE
LOW PASS TYPE
TYPE
VALUE
TYPE
Butterworth
0
Butterworth
Linkwith-Riley
2
Linkwith-Riley
Bessel
4
Bessel
NOT USED
6
NOT USED
ByPass
8
ByPass
High / Low pass order p
High / Low pass frequency values are the frequency in the filter in Hz (150 Hz and 12,000 Hz in this
case).
(See 3.1.3 XOVER on page 18 for additional information).
VALUE
1
3
5
7
8
arameters
are the order of the filter. (In this case 3rd and 2nd respectively)
MX
MKII
PAGE 23
Tabla de contenido
loading

Productos relacionados para Work Pro Digiline Serie

Este manual también es adecuado para:

Digiline mx mkii

Tabla de contenido