Product Description; Technical Data; Control Board - Dea REV220 Instrucciones De Uso

2 PRODUCT DESCRIPTION

Models and contents of the package
The name REV identifies a series of electromechanical operators for sliding gates with different features as to motor and control
board power supply voltage, capacity, mechanical adjustment of force, electronic clutch and built-in limit switch. All automated mo-
dels involve the use of advanced control units (NET series) equipped with anti-crushing sensor, built-in 433 MHz radio receiver, speed
control and slow down in opening and closing. The REV models are intended primarily for residential / condominium and Semi-
intensive/intensive use depending on the duty cycle foreseen for the automation.
REV is completed by a set of accessories listed in the "PRODUCT ACCESSORIES" table (page 114).
REV is composed of a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on the
gate, converts the circular motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the "Contents of the Package" (Pic. 1) and compare it with your product for useful consultation during assembly.
Transport
REV is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all informa-
tion that may be provided on the same box for storage and handling.

3 TECHNICAL DATA

Motor power supply voltage (V)
Absorbed power (W)
Max Thrust (N)
Work cycle
(leaf L=8m)
Maximum n° of opera-
tions in 24 hour
(leaf L=8m)
Built-in capacitor (µF)
Operating temperature range (°C)
Motor thermal protection (°C)
Opening speed (m/min)
Weight of product with package (Kg)
Protection degree
Power supply (V)
Rated power transformer (VA)
Fuse F2 (A) (transformer)
Batteries
Fuse F1 (A) (batteries input)
24V operators outputs
Warning: The above values are calculated by taking the maximum power
supplied by the respective processors. In absolute terms, the maximum current
from each output must not exceed 10A.
Auxiliaries power supply output
"Warning" output
Electric lock output
Flashing light output
Operating temperature range (°C)
Receiver frequency
Transmitters type of coding
Max remote controllers managed
20
REV220 - REV220/M -
REV220/IB
900
up to 1400 Kg
up to 1000 Kg
up to 1400 Kg
up to 1000 Kg
NET24N
230 V ~ ±10% (50/60 Hz)
250 VA (230/22V)
3,15A
2x 12V 1,3A
15A
1x 10A
+24 V max 200mA
+24 V max 15 W
24V max 5W or max
1 art. 110
24 V max 15W
-20÷50 °C
433,92 MHz
HCS fix-code - HCS rolling
code - Dip-switch
100
OPERATOR
REV220/RF - REV220/RFM -
REV220/RF/IB
230 V ~ ±10% (50/60 Hz)
500
1200
18 cycles/hour
22 cycles/hour
420
510
18
-20÷50 °C
150 °C
10
18
IPX4

CONTROL BOARD

Power supply (V)
Fuse F2 (A)
Fuse F1 (A)
230V operators outputs
Auxiliaries power supply output
"Warning" output
Electric lock output
230V Flashing light output
24V Flashing light output
Operating temperature range (°C)
Receiver frequency
Transmitters type of coding
Max remote controllers managed
REV24/F - REV24/M -
REV24/IB
24 V
250
450
30 cycles/hour
36 cycles/hour
720
850
-
-
12
NET230N
230 V ~ ±10% (50/60 Hz)
5A
160mA
2 x 600W
+24 V max 200mA
230 V ~ max 2x 40W
max 1 art. 110 or 24V
output max 5W configurable
230 V ~ max 40W
24 V max 100mA
(for led flashing light) art.
LED24AI
-20÷50 °C
433,92 MHz
HCS fix-code - HCS rolling
code - Dip-switch
100