Charger Wall Mounting Trc 3; Service And Maintenance; Disposal; Warranty - Festool TRC 3 Manual De Instrucciones

There are two elongated holes on the back of the
TRC 3 for mounting the charger to a wall using two
screws (e.g. round head or flat head screw with
shank diameter of 5 mm).
Insert the two screws into the wall at a distance
of 96 mm from one another and leave the screw
heads protruding approx. 4 mm.
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power leads or other components,
which in turn can lead to accidents with serious
consequences.
Never throw spent battery packs into domestic
waste containers!
Conditions of 1+2 Warranty
You are entitled to a free extended warranty (1 year
+ 2 years = 3 years) for your Festool power tool. Fes-
tool shall be responsible for all shipping costs dur-
ing the first year of the warranty. During the second
and third year of the warranty the customer is re-
sponsible for shipping the tool to Festool. Festool
will pay for return shipping to the customer using
UPS Ground Service. All warranty service is valid 3

Charger wall mounting TRC 3

Service and maintenance

To prevent accidents, always remove the plug
from the power supply socket before carrying out
any maintenance or repair work on the tool!
– Keep the air slits on the machine and the charger
– Keep the contacts on the machine, charger and

Disposal

Return spent or defective battery packs to dealers,
the Festool aftersales service department or ap-
proved waste disposal facilities. This ensures that
they are correctly recycled.

Warranty

years from the date of purchase on your receipt or
invoice.
Festool Limited Warranty
This warranty is valid on the pre-condition that the
tool is used and operated in compliance with the
Festool operating instructions. Festool warrants,
only to the original consumer purchaser, that the
specified tool will be free from defects in materials
and workmanship for a term of one year from the
4 mm/
0.16''
96 mm/
3.78 ''
WARNING
Do not use compressed air to clean the electrical
tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
free and clean to ensure adequate cooling.
battery pack clean.
5