Legs - Silvercrest SWWS 240 C1 Instrucciones De Uso

Legs

Once the wax discs
1) Open the lid
upwards.
2) Pick up a little wax using the flattened edge of the spatula
You can wipe off excess wax on the rim of the appliance.
3) Apply the wax to the skin in the direction of hair growth (from the
knee towards the heel). The wax strips should have the approxi-
mate thickness of an orange peel and the area of two spatulas
laid side by side. You may have to add wax. Try to make sure that
one end of the applied wax strip (the end nearer to your heel) is a
little thicker as you will need to be able to grip this end for removal.
4) After application, you can place the spatula
on the edge of the appliance so that the spatula
the inner bowl
5) Wait about 30 - 60 seconds until the wax is dry.
6) Pull the skin taut with one hand. Grip the wax strip by the thicker
end and pull it off with a rapid movement against the direction of
hair growth (from your ankle towards your knee).
Repeat the process for the remaining areas of skin.
7) When you are finished with the treatment, pull the plug from
the mains power socket to turn off the appliance. The control
lamp goes out.
│ GB │ MT
■ 78
are completely melted:
by turning it anticlockwise slightly and lifting it
.
.
into the tray
projects over
SWWS 240 C1