Hitachi Koki DH 25DL Instrucciones De Manejo página 11

Taper shank adapter
Taper mode
Morse taper Drill bit
(No. 1) (taper shank)
Morse taper Drill bit
(No. 2)
(taper shank)
Taper shank adapter formed A-taper
A-taper
or B-taper is provided as an optional
accessory, but drill bit for it is not
B-taper
provided.
13 mm Hammer Drill chuck and Chuck wrench
Impact Drill Application
(
Straight Shank Bit
3. Anchor setting (rotation + hammering)
Anchor setting adapter (for rotary hammer)
Anchor size
W1/4"
W5/16"
W3/8"
Anchor setting adapter (for manual hammer)
Anchor size
W1/4"
W5/16"
Anchor setting adapter
W3/8"
(for manual hammer)
W1/2"
W5/8"
4. Bolt placing operation with Chemical Anchor.
(rotation + hammering)
Standard socket
( )
on the market
5. Demolishing operation (Hammering only)
(Model DH25DAL and DH36DAL only)
Bull point (Round type) (SDS-plus shank)
Bull point (Square type) (SDS-plus shank)
6. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank) (Model DH25DAL and
DH36DAL only)
Applicable drill bit
11.0 – 17.5 mm
21.5 mm
13 mm Hammer
)
Drill Chuck
(SDS plus shank)
Chuck wrench
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
(SDS-plus shank)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Cutter (SDS-plus shank) (Model DH25DAL and
DH36DAL only)
7. Grooving (Hammering only)
Grooving chisel (SDS-plus shank) (Model DH25DAL
and DH36DAL only)
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G) and chuck wrench
Special Drill chuck (13VLR)
screw
Chuck wrench
9. Drilling holes (rotation only)
Drill chuck (13VLA)
Chuck wrench
13 mm drill chuck ass'y (include chuck wrench
ass'y) and chuck (for drilling in steel or wood).
10. Driving Screws (rotation only)
Bit
No.
Bit No. Screw Size
No. 2
No. 3
11. Dust cup, Dust collector (B)
Dust cup
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
Drilling anchor holes
Drilling holes in concrete
Drilling holes in tile
English
Chuck adapter (G)
(SDS plus shank)
Chuck adapter (D)
(SDS plus shank)
Chuck adapter (D)
(SDS plus shank)
Length
3–5 mm 25 mm
5–8 mm 25 mm
Dust collector (B)
10