Using The Timer - Panasonic SC-PM42 Instrucciones De Funcionamiento

Using the timer

Setting the clock
This is a 12-hour clock.
1 Press [CLOCK/TIMER] to select "CLOCK".
Each time you press the button:
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to set the time.
3 Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust as
necessary.
Using the play timer
You can set the timer to come on at a certain time to wake you up.
Preparation
• Turn the unit on and set the clock.
• Prepare the music source (disc, radio, USB or iPod) and set the
volume.
1 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to set the starting
time.
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 and 3 to set the finishing time.
10
10 10
SC-PM42PP,PC.indb 10
zPLAY
PLAY
zPLAY
Start time
Play timer indicator
Finish time
To activate the timer
5 Press [z, PLAY] to turn on play timer.
No display (off)
zPLAY
6 Press [^] to turn off the unit.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
1) Press [z, PLAY] to clear the timer
or volume
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to select
(when the unit is on
zPLAY.
or in standby mode)
cancel
Press [z, PLAY] to clear the timer indicators
from the display.
Note
• The play timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
The play and sleep timer can be used together. The sleep timer always
has priority. Be sure not to overlap timer settings.
2/5/2010 10:55:35 PM