Menu Operation - TECshow SATURN Manual De Usuario

Ver
(software version)
Rest (all reset)
defa
(reset to factory
defaults)

6. MENU OPERATION

This fixture has 4 keys on front panel for operation,
press these keys to set DMX address, reset, edit and
run programs and so on.
[MENU] press MENU key to enter edit status, in edit
status, if press MENU again, it will return the upper
interface. If no operation 30 seconds after enter edit
status, the fixture will exit the edit status automat-
ically.
[Up] press UP key, the indicator will flash, the ad-
dress increases one by one, if hold the key continu-
ously, the address will increase rapidly. If no press
within 30 seconds, the indicator stops flashing and
7. MENU FUNCTION SETTING
1) DMX address setting
1.Press <MENU> to enter EDIT interface
2. Press <UP/DOWN> to choose, then press
<ENTER> to enter Addr
press
"ENTER"
to enter,
or press
"MENU"
to exit
exit it. In edit status, press UP key, it will display the
options circularly from down to up.
[Down] press DOWN key, the indicator will flash,
the address decreases one by one, if hold the key
continuously, the address will decrease rapidly.
If no press within 30 seconds, the indicator stops
flashing and exit it. In edit status, press DOWN key,
it will display the options circularly from up to down
.
[ENTER] in normal status, no function after press
ENTER. In edit mode, press ENTER to enter lower
interface.
3. Press <UP/DOWN> to choose address 001~XXX
4. Press <ENTER> to confirm, or press <MENU> to
exit
current software version
all reset
reset to defaults
P. 9
English version | Tecshow Saturn