Control Panel Operation; Dmx Linking - TECshow STRATUS 1500 Manual De Usuario

While operating the Stratus 1500, make sure there
is adequate fog fluid in the machine to prevent
pump and heater damage. When the fog fluid level
5. OPERATION

Control Panel Operation

To access the control panel functions, use the four
buttons located underneath the display. Please
refer to the Product Overview to see the button
locations on the control panel.
Button
Menu: Press to exit from the current menu or func-
tion.
Up: Press to scroll up the list of options or to find a
higher value.
Down: Press to scroll down the list of options or to
find a lower value.
Enter: Press to activate a menu option or a select-
ed value.
Menu Map
Mode Programming Steps
DMX Addr
Mode
Tempe- Ht
rature

DMX Linking

The Stratus™ 1500 works with a DMX controller. In-
formation about DMX is in the Ampro® DMX Primer,
which is available from the Ampro website http://
amproweb.com/.
Configuration (DMX)
Set the product in DMX mode to control with a DMX
controller.
Description
A 1–A512 Sets DMX start-
ing address
Hxxx Displays
current heater
temperature
becomes low, simply add more fog fluid to continue
using the Stratus 1500.
1. Connect the product to a suitable power outlet,
and turn the power switch to on.
2. Connect a DMX cable from the DMX output of
the DMX controller to the DMX input socket on
the product.
DMX Starting Address
When selecting a starting DMX address, always
consider the number of DMX channels the selected
DMX mode uses. If you choose a starting address
that is too high, you could restrict the access to
some of the product's channels. The Stratus™ 1500
uses 1 DMX channel, which defines the highest
configurable address as 512. If you are not familiar
with the DMX protocol, download the DMX Primer
from www.amproweb.com. To select the starting
address, do the following:
1. Press <MENU> repeatedly until Addr shows on
the display.
2. Press <ENTER> and A 1–A512 will show on the
display.
3. Use <UP> or <DOWN> to select the starting
address.
4. Press <ENTER>.
English version | Tecshow Stratus 1500
P. 7