Safety Instructions - TECshow SATURN Manual De Usuario

3. SAFETY INSTRUCTIONS

This device was in perfect condition before leaving
factory. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary
for the user to follow the safety instructions and
warning notes written in this user manual.
Damages caused by the disregard of this uaser manual are not subject to warranty.
• If the device has been exposed to temperature
changes due to environmental changes, do not
switch it on immediately. The arising condensa-
tion could damage the device. Leave the device
switched off until it has reached room temper-
ature.
• Please make sure that the device is earthed
correctly.
• Please replace housing if it is broken. This fix-
ture can be used after installed.
• The electric connection must be carried out by
qualified person.
Please be aware that damages caused by manual modifications to the device are not subject to
warranty. Keep away from non-professionals.
The dealer will not accept liability for any resulting defects of problems.
Never touch the device during operatipon!
the housing may heat up
Never look directly into the light source,
as sensitive persons may suffer an epileptic shock.
WARNING!
• Make sure that the available voltage is not high-
er than the stated voltage in this manual.
• Make sure the power cord is never crimped
or damaged by sharp edges. If this happens,
replacement of the cable must be done by an
authorized dealer.
• If the external flexible cable or cord of this fix-
ture is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or
a similar qualified person in order to avoid a
hazard.
• Please cut off the power before cleaning, main-
taining or turn on the fixture.
CAUTION!
CAUTION!
P. 5
English version | Tecshow Saturn