Instant Domestic Hot Water Production Kit; Stove Positioning; Rearming; Thermo-Products Features - Dal Zotto Valli idro Manual Del Usuario

inStAnt DOMeStic hOt WAter PrODuctiOn Kit

Warnings: if the instant hot water production kit is to be used, contact the company technical after-sales service.

StOve POSitiOning

For correct product functioning, it is recommended to position it in a way that it is perfectly level, with the aid of a spirit level.

reArMing

The figures below show the positions for rearming the tank (85°C) and h2O (100°C).
We recommend contacting a qualified technician in the event rearming occurs to verify its cause.
FRIDA IDRO
85 °c
100°c

therMO-PrODuctS feAtureS

Water content of the thermo product heat exchanger (l)
Volume of expansion vessel integrated into thermo-product (l)
Maximum content of water in the system for integrated expansion vessel (l)*
3 bar safety valve integrated into the thermo-product
Minimum and maximum pressure switch integrated into the thermo-product
Pump integrated into the thermo-product
Pump max. head (m)
*Content of water in the system in addition to that of the
thermo product that can be managed with the integrated
expansion vessel. An additional expansion vessel must be
installed for a higher content of water.
The following graph shows the behaviour of the circulator
pump used on our thermo-products at the speeds that can be
set.
50
VALLì IDRO
85 °c
100°c
jOLE IDRO
85 °c
100°c
13
6
23
yes
yes
yes
5
6
5
4
3
2
1
0
0,0 0,5 1,0
Flow rate (m
| engLiSh
MARTA IDRO
85 °c
100°c
13 18.5 15
6 8 8
23 33 36
yes yes yes
yes yes yes
yes yes yes
5 5 5
1,5 2,0 2,5
/h)
3