Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3-
Risk assessment
Before starting to install the automatic gate system it is necessary to evaluate all possible points of danger during the movement of the gate. Fig.2
shows some of the danger points of the sliding gate.
B
Before starting installation you need to check that the gate slides properly, that there are secure mechanical stops and check the gate support system.
4-
Electrical wiring harnesses
1 - Photocells
2 - Selector switch
3 - Flashing light
4 - Gear motor
5 - Rack
System set-up
4.1- Power supply line wiring: Inside the transformer compartment there is a terminal with a 2 AT protection fuse (connect the phase in the corresponding
pole to the fuse).
26
26
C
A
4
5
3 x 1.5 mm
230 V~
Fuse 2 A L 250 V (Mains: 230V, 240V)
Fuse 4 A L 250 V (Mains: 110V, 117V, 125V)
B
A
1
2 x 0.5 mm
2
2
Fig. 2
A - Crushing
B - Conveying
C - Shearing
3
2
2 x 1 mm
2
3 x 0.5 mm
1
4 x 0.5 mm
2
Fig. 3
EN
2
Capítulos
Tabla de contenido
