Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English / USA
3
4
Fitting the skirt
:
Push the skirt (3) into the slot in the
deflector until it can be engaged on
the lug (4).
:
Fit the washer on the screw.
:
Insert screw and tighten it down
firmly.
32
Replacing the Edger Blade
1
A
B
C
A bent or cracked blade must not be
straightened or welded – it may shatter.
Such blades must be replaced – see
"Fitting the Edger Blade".
STIHL recommends you use only
genuine STIHL edger blades – see
"Special Accessories".
:
Replace the blade (1) when its
length (A) is no longer sufficient to
maintain the necessary ground
clearance (B) and obtain the
required depth of cut (C).
To avoid out-of-balance:
check blade on a STIHL balancer –
see "Special Accessories".
Do not resharpen the blade!
Inspections and
Maintenance by
Dealer
Fuel pickup body in tank
:
Have the pickup body in the fuel
tank replaced every year.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
FC 100
Capítulos
Tabla de contenido
