Tabla de contenido
Idiomas disponibles
Idiomas disponibles
:
Tighten wingnut clockwise.
:
Standing in the normal working
position, check the depth of cut
again and correct it if necessary.
FC 100
90°
Edging
:
Start the engine.
:
Start the cut at half throttle and
continue cutting at full throttle.
:
Hold and guide the unit so that the
blade is vertical.
:
Cut steadily so that the engine
speed does not decline to any major
extent – do not apply force!
:
Cut at a normal walking pace.
:
Do not push the blade into the
ground!
English / USA
1
:
Always walk forwards when cutting,
do not pull the unit towards you.
:
Cut at a steady pace to avoid having
to make several passes.
1 = Gunning sight for cutting blade.
15
Capítulos
Tabla de contenido
