Tabla De Contenido - Stihl FC 100 Manual De Instrucciones

Contents
Guide to Using this Manual .............. 2
Safety Precautions ........................... 3
Working Techniques ....................... 13
Mounting the Loop Handle ............. 16
Adjusting the Throttle Cable ........... 16
Fitting the Edger Blade ................... 17
4-MIX Engine .................................. 18
Fuel ................................................ 18
Fueling ............................................ 19
Starting / Stopping the Engine ........ 20
Operating Instructions .................... 23
Cleaning the Air Filter ..................... 23
Motor Management ........................ 24
Adjusting the Carburetor ................ 24
Spark Arresting Screen in Muffler ... 26
Checking the Spark Plug ................ 26
Lubricating the Gearbox ................. 27
Replacing Starter Rope
and Rewind Spring ......................... 28
Storing the Machine ........................ 31
Replacing the Depth Wheel ............ 31
Replacing the Skirt ......................... 31
Replacing the Edger Blade ............. 32
Inspections and Maintenance by
Dealer ............................................. 32
Maintenance chart .......................... 33
Parts and controls ........................... 35
Specifications ................................. 37
Special Accessories ....................... 37
Maintenance and Repairs ............... 38
STIHL Incorporated Federal
Emission Control Warranty
Statement ....................................... 39
STIHL Incorporated California
Exhaust and Evaporative Emissions
Control Warranty Statement ........... 41
Trademarks .................................... 43
STIHl
FC 100
English / USA
Allow only persons who understand this
manual to operate your edger.
To receive maximum performance and
satisfaction from your STIHL edger, it is
important that you read and understand
the maintenance and safety precautions,
starting on page 3, before using your
edger.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!
Warning!
Because an edger is a high-speed
cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector and handle for the type of
cutting attachment being used. Always
wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your edger differs from those
described in this manual, please contact
your STIHL dealer for information and
assistance.
1