Stihl FC 100 Manual De Instrucciones página 37

English / USA
Definitions
1. Loop handle
For easy control of the machine
while working.
2. Slide control
Starting throttle, run and stop
switch. Keeps the throttle partially
open during starting and switches
the engine's ignition off to stop the
engine.
3. Throttle trigger interlock
Must be depressed before the
throttle trigger can be activated.
4. Throttle trigger
Controls the speed of the engine.
5. Choke lever
Eases engine starting by enriching
the fuel mixture.
Ignition wire.
6. Spark plug boot
Connects the spark plug to the
ignition wire.
7. Air filter cover
Protects the air filter.
8. Fuel tank
For fuel and oil mixture.
9. Machine support
For resting machine on the ground.
36
10. Fuel filler cap
For closing the fuel tank.
11. Carburetor adjusting screws
For tuning the carburetor.
12. Fuel pump
Provides additional fuel feed for
a cold start.
13. Starter grip
The grip of the pull starter, which is
the device to start the engine.
14. Muffler
(with spark arresting screen)
Attenuates exhaust noises and
diverts exhaust gases away from
the operator. The spark arresting
screen is designed to reduce the
risk of fire.
15. Cutting blade
Metal cutting blade for cutting
weeds and soft green plants.
16. Deflector
The deflector is designed to reduce
the risk of injury from flying objects
hurled aside by the cutting blade
and from contact with the cutting
tool.
17. Wheel
The wheel mounted on the deflector
guides the cutting blade of the edger
over the ground at a preset height.
18. Wing nut
Must be loosened to move the
wheel for setting the cutting depth.
19. Skirt
The skirt is designed to reduce the
risk of injury from flying objects
hurled aside by the cutting blade.
FC 100