ENGLISH
Problem
HOPPER AND RELEVANT LID
The hopper does not lift/dump
The hopper does not return to horizontal
position/lower
HOPPER AND RELEVANT LID
The hopper lid does not open/close
DUST CONTROL SYSTEM NOZZLES
No water from the nozzles
No water to the nozzles
The water pump does not stop
STEERING SYSTEM
The machine does not move straightforward
The steering is hard
BRAKE SYSTEM
The machine brake system is not effi cient
The parking brake is not effi cient
STABILITY
When the machine moves the stability is
reduced
WHEELS
The rear wheels are noisy
48
INSTRUCTIONS FOR USE
The control valve assembly is stuck
Open push-button
The fuse is blown
Open safety push-button
Activated broom switch
The cylinder gaskets are worn
The fuse is blown
Open push-button
Open safety push-button
Relay board failure
Burned solenoid valves
Lack of tension in the actuator
Open push-button
Misadjusted actuator cams
The actuator is faulty
The water fi lter is clogged
The nozzles are clogged
The water pump relay is burnt
The pump is not operating
The water pump switch is deactivated
The fuse is blown
The water pump relay is burnt
The fl oat is stuck
Incorrect installation of the fl oat
Misadjusted rear axle toe-in
The power steering is faulty
The priority valve is faulty
The steering wheel drive hydraulic cylinder is
faulty
The brake fl uid level is low
The braking masses are worn or greasy
There is air in the line
The drum brake cylinder is faulty
The brake fl uid pump is faulty
The brake is misadjusted
The tire pressure is incorrect
The wheel bearings are worn
33015124(3)2008-02
Possible cause
RS 1300
Remedy
Repair
Replace
Replace
Replace
Deactivate
Overhaul the cylinders
Replace
Replace
Replace
Replace
Replace
Repair the electrical system
Replace
Adjust the actuator cams
Replace
Clean/replace
Clean
Replace
Repair/replace
Activate
Replace
Replace
Repair
Install correctly
Adjust
Replace
Replace
Replace
Check the brake fl uid level
Replace
Bleed the system
Replace
Overhaul
Adjust
Check the tire pressure
Replace