Parameters In The "Settings / Sbi Protocol" Menu - Sartorius Entris II Advanced Line BCA Instrucciones De Manejo

Parameters Settings
Sample ID On
function
Autom .
increment
Autom .
decrement
Off*
Sample ID2 On
function
Autom .
increment
Autom .
decrement
Off*
* Factory setting

4 . 1 1 . 1 0 Parameters in the "Settings / SBI Protocol" Menu

Parameters Settings
SBI function Manual
without
stability
Manual with
stability*
Auto without
stability
Auto without
stability
Print after
weight
change
Manual print Value w/o
format identifier
Value*
Date, Value
Value (N, T,
G#)
Date, Value
(N, T, G#)
* Factory setting
Explanation
− Activates the sample ID .
− The sample ID is queried before each printout .
Counts up the sample ID automatically .
Counts down the sample ID automatically .
Deactivates the sample ID .
− Activates the sample ID2 .
− The sample ID is queried before each printout .
Counts up the sample ID2 automatically .
Counts down the sample ID2 automatically .
Deactivates the sample ID2 .
Explanation
If a print command is given, e .g ., via the [print] button: The weight value is
printed .
If a print command is given, e .g ., via the [print] button: The weight value not is
printed until the device is stable .
Prints the weight value automatically without device stability .
Prints the weight value automatically only when the device is stable .
Prints after a threshold for device stability has been exceeded and the weight has
previously been reduced to less than half of the threshold .
Prints the weight value without labeling, e .g ., "Net" or "G" .
Prints the weight value .
Prints the weight value and a time stamp .
Prints a weight value block (net, tare, calculated gross) .
Prints a time stamp and a weight value block (net, tare, calculated gross value) .
Operating Concept
Entris II Advanced Line Operating Instructions
®
25