"Main Menu" Menu Structure; Applications" Menu Structure - Sartorius Entris II Advanced Line BCA Instrucciones De Manejo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 161

4 . 1 0 "Main Menu" Menu Structure

4 . 1 0 . 1 "Applications" Menu Structure

Level 1
Description
Weighing
Opens the "Weighing" application . The "Weighing" application determines the weight of a sample
within the device's specific weighing range .
Mixing
Opens the "Mixing" application . Use the "Mixing" application to weigh up to 99 components one
after the other for a mixture or formula in one container . The balance is automatically tared after
each component is weighed . The weight value of the individual component or the total weight can
be displayed .
Statistics
Opens the "Statistics" application . Use the "Statistics" application to save up to 99 weight values
and calculated values and statistically analyze them .
Components
Opens the "Components" application . Use the "Components" application to weigh up to 99
weight values . The components can be weighed in various containers . Each container can be tared
before each component is weighed .
Density
Opens the "Density" application . Use the "Density" application to determine the density of solid
samples using a density set based on the buoyancy method . The density is determined using
Archimedes' Principle .
Percentage
Opens the "Percent" application . Use the "Percent" application to determine the percentage
share or the percentage difference of the sample based on a reference weight .
Conversion
Opens the "Conversion" application . Use the "Conversion" application to multiply the weight
value by a user-defined factor . The selected factor is saved to protected memory .
Animal
Opens the "Animal weighing" application . The "Animal Weighing" application is used for moving
weighing
samples, e .g ., live animals, and for weighing in unstable environments . A measurement cycle is
automatically carried out with a defined number of measurements for each object to be weighed .
The individual measurements are averaged, and this average is displayed as the result .
Check-
Opens the "Checkweighing" application . Use the "Checkweighing" application to check whether
weighing
a weight value falls within the specified tolerances . This application also makes it easy to weigh in
samples to a specified target weight .
Peak hold
Opens the "Peak hold" application . The "Peak hold" application calculates the maximum weight
value of a sample (peak value) . The value remains on the display for five seconds after the sample
has been removed from the balance .
Counting
Opens the "Counting" application . The "Counting" application counts parts with approximately
equal weight by comparing with a reference sample .
Pipette test
Opens the "Pipette test" application . Use the "Pipette test" application to save up to 99 pipette
measurements and statistically analyze them .
Operating Concept
Entris
II Advanced Line Operating Instructions
®
17
Tabla de contenido
loading

Tabla de contenido