Connecting A Camera Equipped With A Visca Rs-422 Connector; Connecting Multiple Cameras Equipped With Visca Rs-232C Connector; Visca Rs-422 Connector - Sony RM-BR300 Manual De Instrucciones

Connecting a Camera Equipped
with a VISCA RS-422 Connector
You can use the VISCA RS-422 connectors to connect
this unit to the camera instead of the VISCA RS-232C
connectors. Use of the VISCA RS-422 connectors
allows the connection up to 1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plugs that come with this unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (page 21).
For the use of the RS-422 connector plugs, see page 22.
Notes
• When using the VISCA RS-422 connectors, check
that the DIP switch on the bottom of this unit (page 9)
is set to RS-422.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
12
GB
Connections
Camera BRC-300/300P
to AC outlet
VISCA RS-422
VISCA RS-422 cable
VISCA RS-422
DC IN 12V
AC power cord
(supplied)
to AC outlet
AC power adaptor
MPA-AC1 (supplied)
Connecting Multiple Cameras
Equipped with VISCA RS-232C
Connector
Connections with the VISCA RS-232C cables (cross
type) enable control of up to seven cameras with a single
RM-BR300 Remote Control Unit.
VISCA RS-232C
Camera BRC-
300/300P
1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
First camera
RS-232C cable
VISCA RS-232C IN
1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
Second camera
RS-232C cable
VISCA RS-232C IN
1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
Third to Seventh camera
to AC outlet
RS-232C cable (supplied)
(SONY: 1-590-879-33)
to VISCA RS-232C IN
!
DC IN 12V
to AC outlet
VISCA RS-232C OUT
!
DC IN
12V
to AC outlet
VISCA RS-232C OUT
!
DC IN
12V
to AC outlet