Adjusting The Backrest; Adjusting The Rear View Mirrors - Vermeiren Carpo 2 Manual De Instrucciones

3.5

Adjusting the backrest

1 = Seat system
2 = Tilt lever
3 = Head rest
Headrest:
1. Gently press the locking pin  toward the headrest.
2. Move the headrest to the desired height.
3. Let go of the locking pin .
4. The headrest audibly locks into place.
3.6

Adjusting the rear view mirrors

It is possible to adjust the rear view mirrors:
1
Adjustment 1 (arrow A):
1. Grasp the rear view mirror .
2. Rotate the rear view mirror  in the desired position.
Or
Adjustment 2 (arrow B):
1. Move the cap  upwards.
2. Loosen the mirror screw .
3. Grasp the tube  gently.
4. Rotate the tube  and put the mirror  in the desired
position.
Page 23
L
WARNING: Risk of injury - Never perform
adjustments while you are driving.
A tilt lever  has been added to the side of the
backrest (transition to seat upholstery). Press this
lever upwards to release the backrest and fold
the backrest forward, or adjust the angle of the
backrest.
1 = Locking pin
Carpo 2
2015-07