Auto Clock Setting - memorex MVD4541 Manual De Instrucciones

÷
÷
Setting up the VCR section
IAuto c_ock setting
The Auto cBock function w{H automatically set the built-
in clock (Month, Day, Year and Time) when the OVO/
VCR is connected to an Antenna or Cable system and it
isturned
off. As the DVD/VCR searches for a receivable
station in your area and it receives a broadcast signal
for Auto clock, the Auto dock needs severa_ minutes to
set itself.
I Connect the Antenna or Cable system.
• tf you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outlet.
3 Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto ctock set is not effective.
4 After the clock is set on the disptay window, press
POWER.
• Depending on the reception condition, it may take approx.
thirty minutes.
5 Press DISPLAY to check the clock on the screen.
6 If the clock is not set, check the Antenna condition. The
Auto clock may not function properly if the reception condi-
tion is not good.
Auto dock adjustment
The Auto clock adjustment witt be performed at 12:00 PM
everyday if you turn off the DVD/VCR.
• tf you use a cane box and you want Auto ctock adjustment
to be performed, the cable box must be teft on.
• The Auto ctock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
To set Auto dock to off
When shipped from factory, the "AUTO CLOCK" option is set
to ON.
But if you do not want Auto clock set (adjustment):
I Turn on the DVD/VCR.
12 Press VCR MENU.
:3 Press SET + or - to setect the "SYSTEM SETUP' option,
then press ENTER.
4. Press SET + or = to select the "AUTO CLOCK" option.
5 Press ENTER to select "OFF.
6 Press VCR MENU repeatedly to return to the normal
screen.
• When the "AUTO CLOCK" is set to "OFF", the Auto Clock
adjustment does not function.
• Set the clock manually (see page 16).
To set standard time
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the Auto clock set.
To correct the situation:
I PressVCR MENU.
2 Press SET + or = to select the SYSTEM SETUP"
option, then press ENTER.
3 Press SET + or = to select the "STANDARD TIME"
option, then press ENTER.
4. Press SET + or = to select your time zone, then press
ENTER.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
AUTO
GMT- 4 hours
(GMT: Greenwich Mean Time)
GMT- 5 hours
GMT- 6 hours
GMT- 7 hours
GMT- 8 hours
GMT- 9 hours
GMT- 10 hours
AUTO SET
5 Press VCR MENU twice to return to the normal screen.
NOTE:
To be able to setect the standard time, the clock must first
be set by "AUTO CLOCK" once.
Daylight saving time setting
You can set the Daylight saving time automatically or
manually.
I Press VCR MENU. Press SET +
or = to select the "SYSTEM
SETUP" option, then press
ENTER.
12 Press SET + or - to seIect the
"DAYLIGHT SAVING TIME"
option, then press ENTER.
3 Press SET + or = to select one of
the options, then press ENTER.
Press VCR MENU until the
MENU screen is cleared.
ON: for manual setting
(forward one hour)
OFF: for manuat setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
I SYSTEM SETUP 1
I CLOCK SET
I L ANGUAG FJIDIOivW LA NG U E
| NO NOISE BACKGROUND
t*-ON OFF
|AUTOCLOCK _'ON OFF
MI,,6TANDARDTIME
| DAYUGHT SAVING TIME
When you want to set the Daytight Saving Time manually, on
the first Sunday in April you set to "ON", and on the last Sun-
day in October you set to "OFF".
NOTES:
, When shipped from factory, the "DAYLIGHT SAVING
TIME" option is set to 'AUTO" position.
, When the clock is not set, Daylight Saving Time setting is
not available.
, When there is no Daylight Saving Time in your area, always
select 'OFF" position in step 3.
15
2F3P421A[E] (10-17)
÷
1/25/05, 12:01 PM