Darning - Singer 6038 Manual De Instrucciones

I
Darning
Torn and worn-out clothes and curtains may be easily
and quickly darned with a bit of practice. If you need
more sewing control, you may use a frame (not
supplied), as shown in the illustration.
RECOMMENDED INITIALSETTINGS
Pattern: Straight stitch
Needle position: Center
Needle thread tension: Between 2 and 5
Note: If the darned area is open, such as a hole, baste
a patch of cloth under the hole before darning
the area.
1. Remove presser foot (page 24), lower the feed by
moving the lever to the left (illustration 1) and
lower presser bar.
2. To start darning, make uniform movements to the
front and to the back, over the area to be darned.
Note that in this case, the stitch length shall be
that of the extension of your movements. Smoother
movement will produce dose stitches.
3. Continue darning until all surface is covered with
parallel línes.
1
2
~-