Darning Stitch - Singer ET-1 Manual De Instrucciones

DARNING STITCH

A-26 A-27
D
1
2
3
Stop
Start Start
4
NOTE
Make no
gap here
Stop
1
1 Select pattern 26 or 27 from the Group
Patterns "A" to get the darning stitch.
Change the presser foot to the buttonhole
foot.
2
2 B a s t e t h e u p p e r f a b r i c a n d t h e
reinforcement fabric together. Select the
width of the pattern by using the stitch width
button. Lower the presser foot over the
center of the tear.
3
3. Pull the button holder to rear. Set the button
guide plate on buttonhole foot to the
desired length.
4
4. The size of the darning cycle is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch
width is 7mm (9/32 inch).
a. The length of darning pattern.
b. The width of darning pattern.
44