Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
Pump
has following
problems:
failure
to produce
pressure,
erratic
pressure,
chattering,
loss of pressure,
low water
volume.
Detergent
fails to mix with
spray.
Engine will not start; starts
and runs rough or shuts
down during operation.
Engine
lacks
power.
Cause
1.
Low pressure selector nozzle
installed.
2.
Water inlet is blocked.
3.
Inadequate water supply.
4.
Inlet hose is kinked or leaking.
5.
Clogged inlet hose screen.
6.
Water supply is over 100°F.
7.
High pressure hose is blocked
or leaks.
8.
Spray gun leaks.
9.
Selector nozzle is obstructed.
10. Pump is faulty.
1.
Detergent siphoning tube is not
submerged.
2.
Detergent siphoning tube is
clogged or cracked.
3.
High pressure spray pattern
nozzle is selected..
4.
Detergent siphoning check ball
stuck.
1.
Engine rocker switch set to off
Correction
1.
Replace with high pressure selector
nozzle.
2.
Clear inlet.
3.
Provide adequate water flow.
4.
Straighten inlet hose, patch leak.
5.
Check and clean inlet hose screen.
6.
Provide cooler water supply.
7.
Clear blocks in outlet hose.
.
9.
10.
1.
.
.
Replace spray gun.
Clean selector nozzle.
Contact Sears service facility.
Insert detergent siphoning tube into
detergent.
Clean or replace detergent
siphoning tube.
Select soap spray pattern nozzle on
selector nozzle.
4.
Free detergent siphoning check
ball.
1.
Set engine rocker switch to on (Jor
(O or Off) position.
2.
Low oil level.
3.
Dirty air cleaner.
4.
Out of fuel.
5.
Stale fuel.
On) position.
2.
Fill crankcase to proper level.
3.
Clean or replace air cleaner.
4.
Fill fueltank.
5.
Drain fuel tank; fill with fresh fuel.
6.
Spark plug wire not connected
to spark plug.
7.
Bad spark plug.
8.
Water in fuel.
9.
Excessively rich fuel mixture.
Dirty air fi_ter.
6.
Connect wire to spark plug.
7.
Replace spark plug.
8.
Drain fuel tank; fill with fresh fuel.
9.
Contact local service facility.
Replace air rifler.
23
Tabla de contenido
