Activating And Using The Ice Maker - Bertazzoni REF75PIXL Manual Del Usuario

7. ACTIVATING AND USING THE ICE MAKER

Warning
Keep hands and fingers away from the Ice
Maker during operation.
Shelves
The shelves slide vertically and can be easily
repositioned by users as follows:
> Unscrew the rear fastening knob slightly.
> Lift the front of the shelf and tilt slightly.
> To remove a shelf, slide upwards and then pull
out.
Door Balconies
The door balconies can be easily removed for
cleaning.
> Grasp the balcony by its sides and push it upwards
until it is released from its seat, then pull outwards.
> Reinstall by following the same procedure in
reverse.
16
2
1
www.universal.bertazzoni.com
7.1 Activating and Using the Ice Maker
Notes
> If the ice is not used frequently, it is
advisable to empty the ice container every
8-10 days.
If the ice is not used regularly, older cubes
will lose their clarity, may take on an
unusual taste and will shrink.
> It is normal for some cubes to stick
together.
The Ice Maker is disabled automatically
when the Vacation function is enabled.
When the Ice Maker is activated for the first
time, it is advisable to discard the first ice
produced when the container fills up for the
first time.
> If the unit remains switched off for a
month or more, it is advisable to carry out a
wash cycle of the water filter.
If it is necessary to shut off the mains water
supply, disable the Ice Maker first via the
Menu.
> The Ice Maker will only produce ice if the
FlexMode compartment is set to Freezer
mode.
The Ice Maker will continue to operate even
when the ice container is not in position
To enable the Ice Maker following installation, press
the Ice Maker button.
Note that it will take between 12 and 24 hours for
automatic ice production to occur.
Production is around ten cubes per cycle, with
about ten cycles every 24 hours.
The device's output will depend on the temperature
set for the freezer, the ambient temperature, and
how often the doors are opened. If the refrigerator
is operated without a water connection, ensure that
the Ice Maker is disabled via the corresponding
button .
The Ice Maker produces ice until the container is
completely filled, and stops automatically when the
maximum level is reached.
The SuperIce function increases the quantity of ice
produced over 24 hours, while the Set Cube Size
function changes the size of the cubes produced.