Base Menu Settings - Bertazzoni REF75PIXL Manual Del Usuario

Checking the Status of the Filter
F unctions w ater
isplay tatus
d s
The number of days and quantity in litres remaining
before the filter must be replaced are displayed.
Reset Filter
The Reset Filter function resets the quantity of water
filtered and time since the last filter change. This
must be performed each time the filter cartridge is
changed.
Alternatively, press and hold the Enter
five seconds.
Resetting the Filtered Water Meter
unctions ater
F w
r eset f ilter
Filter Bypass
This function is activated when it is not necessary
to filter the water as that from the mains water
supply is already of sufficiently high quality.
Enabling the Filter Bypass
F unctions w ater
ilter ypass
f b
Disabling the Filter Bypass
F unctions w ater
ilter ypass
f b
Manual Water Filter Cleaning
If ice production has been disabled or not used for
an extended period, it is recommended to carry out
manual cleaning in order to flush the water left in
the system during this period. Repeat the operation
until the water comes out clean. It is important to
shut off the ice maker by pressing the
before proceeding.
Manually Cleaning the Filter
F unctions w ater
anual
leaning
nter >
m c e
f ilter f ilter s tatus
nter > onfirm
e c
button for
ilter ilter tatus
f f s
e nter > c onfirm
f ilter f ilter s tatus
ilter ypass
f b on
f ilter f ilter s tatus
ilter ypass
f b off
button
f ilter
onfirm
c
www.universal.bertazzoni.com
Repeat the operation until the water comes out
clean.
Place the ice container or another suitable
container under the Ice Maker in order to
catch the water, then reclose the drawer.
Wash the container when finished.

5.3 Base Menu Settings

Select the Menu button, then use the Up/Down
button to select
FlexMode Options
The freezer compartment can, when required, be set
to operate as a refrigerator or fresh compartment,
therefore running at an appropriate temperature
for these functions.
Selecting the Refrigerator Function
ettings lex ode
s f m
r efrigerator e nter >
Selecting the Fresh Function
s ettings f lex m ode
resh nter > onfirm
f e c
Restoring the Freezer Function
s ettings f lex m ode
reezer nter > onfirm
f e c
Base Settings
This returns the settings to the factory defaults,
causing any subsequent changes to be lost.
Restoring the Base Settings
s ettings b ase s
nter > onfirm
e c
Important
When the base settings are restored, the
FlexMode compartment setting must be
selected again if it was previously set to
operate in Refrigerator or Fresh mode.
.
ptions
o
c onfirm
o ptions
o ptions
ettings
13
EN