Electrical Connection; Standard Controller (Sc) Electrical Circuit Diagram; Dip Switch - Pfannenberg DTI Serie Manual De Instrucciones

GB
3.5

Electrical connection

3.5.1

Standard controller (SC) electrical circuit diagram

DANGER
Life-threatening danger due to electric shock
Live units and exposed connection cables can generate an electric shock and cause severe accidents.
 Work on electrical connections must be carried out exclusively by trained, qualified electricians.
 Ensure that the unit is voltage-free before routing all electrical connections.
Note
The compressor can be destroyed if the phase sequence is incorrect
 Always check the phase sequence before commissioning the three-phase unit.
 Ensure that the phase sequence rotation is clockwise.
DIP-switch
Optional
Power cable
3x 380V - 420V 50 Hz
3x 440V - 480V 60 Hz
Item Designation
B3 Termal motor protection compressor
F2-F5 Fuse
K20 Contactor compressor
M3 Evaporator fan (internal)
TK Door contact (signal)
X28 Service interface (TTL)
Door contact + fault
X54
indication terminal contact
Operating Manual DTS and DTI 6401 / 6501 Standard Controller (SC) 086100007 © Pfannenberg GmbH
1,2 Fault indication
Door open
4,5 Door contact
Door close
Fault
2
0,14 mm
AWG 26
Item
E1
LP1
M1
S1
T1
X40
Compressor:
Only clockwise rotating field
Designation
Condensate evaporation
Controller
Compressor
Door contact
Transformer
Ground terminal contact
R
085 000474 11189-855
Item Designation
High-pressure pressostat
F1
H1 LED / indicator unit
M2 Condenser fan (external)
SK Fault signal contact
Temperature sensor (internal)
TS1
X50 Mains terminal contact
Page 20 / 38