Safety Systems - Bosch MUM5 Serie Instrucciones De Uso

W Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender! Operate the assembled
blender only and with the lid attached.
W Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the
lid. Add a maximum of 0.5 litres of hot or frothing liquid.
W Important!
Use the appliance with original accessories only. When using the
accessories, follow the enclosed operating instructions. Use only
one tool or accessory at any one time.
W Explanation of the symbols on the appliance or accessory
i
Follow the instructions in the operating instructions.
Y
Caution! Rotating blades.
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
servicing" see page 23

Safety systems

Start lock-out
See "Operating positions" table.
The appliance can be switched on in
pos. 1 and 3 only:
■ when the bowl (11) has been inserted and
turned until it locks into place
and
■ the blender drive cover has been
attached (8).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored. To switch the appliance on
again, turn the rotary switch to P, then
switch on.
124_MUM58xxx_8001027214.indb 19
Overload protection
If the motor switches itself off while the
appliance is being used, the overload pro-
tection feature has been activated. A possi-
ble cause may be that too much food was
processed at one time.
If a safety system is activated, see
"Troubleshooting".
The operating instructions describe several
models, see also overview of models
(Fig. M). The appliance requires no
maintenance.
For your safety en
19
27.11.2015 15:11:45