Deactivating The Filter Display; Resetting The Filter Display - Bosch 800 Serie Manual De Uso Y Cuidado

5. Push the filter cartridge with the
cap in a horizontal position all
the way into the opening in the
base panel.
6. Rotate the filter cartridge by
90°-180° gently in a clockwise
direction until the cap is in a
horizontal position.
i
After changing the filter, reset
the filter display.
i
The appliance might be used
without a water filter. If you
choose this option replace the
water filter by a water filter
substitute cartridge.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1-800-944-2904.
Resetting the filter
display
i
If the filter display is not reset,
the next required filter change
cannot be signalled by the
display.
After each filter change:
q Simultaneously hold down the
super cool and ice buttons for
3 seconds.
22
Deactivating the filter
display
i
The appliance might be used
without a water filter. If you
choose this option replace the
water filter by a water filter
substitute cartridge. In this case
the filter display might be
deactivated to prevent filter
change messages. To purchase
a water filter substitute cartridge
contact your local dealer or call
1-800-944-2904.
d
WARNING
To avoid serious illness or death,
do not deactivate the filter display
while using an water filter.
To deactivate the filter display:
q Simultaneously hold down the
setup and ice buttons for
3 seconds.
i
Re activate the filter display by
pressing the super and ice
buttons for 3 seconds
simultaneously.
d