Intended Use - DeWalt D25722 Manual De Instrucciones

FIG. 1
CHISEL BIT ADJUSTMENT MODE
HAMMERDRILLING
MODE
CHISEL BIT ADJUSTMENT MODE
I
H
C

INTENDED USE

Your rotary hammer has been designed for professional rotary drilling
and chipping applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This heavy-duty rotary hammer is a professional power tool. DO NOT
CHIPPING MODE
let children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
Soft Start Feature
The soft start feature allows the speed to build up speed slowly, thus
preventing the drill bit from walking off the intended hole position
when starting.
E
F
The soft start feature also reduces the immediate torque reaction
transmitted to the gearing and the operator if the hammer is started
D
with the drill bit in an existing hole.
Electronic Speed and Impact Control
A
(Fig. 1, 4)
The electronic speed and impact control dial (G) offers the following
B
advantages:
– use of smaller accessories without risk of breakage;
G
– minimised break-out when chiselling or drilling in soft or brittle
– optimal tool control for precise chiselling.
E
Torque Limiting Clutch
The torque limiting clutch reduces the maximum torque reaction
transmitted to the operator in case of jamming of a drill bit. This
feature also prevents the gearing and electric motor from stalling.
NOTICE: Always turn the tool off before changing torque control
settings or damage to tool may result.
17
materials;