Location And Function Of Parts; Front Panel Of The Digital Surround Processor - Sony MDR-D5100 Manual De Instrucciones

¡ Preparation

Location and Function of Parts

Front Panel of the
Digital Surround
Processor
1 2
POWER
DIGITAL
ANALOG
INPUT
CINEMA
MUSIC
EFFECT
DECODE MODE
DOLBY DIGITAL
DOLBY SURROUND
DTS
L
LS
VIRTUAL
OUTPUT
PHONES
4 5
8
3
C R
RS
LEVEL
MIN MAX
6 7
1 DIGITAL input indicator
ANALOG input indicator
INPUT button
Press to select the input source
(DIGITAL/ANALOG).
2 POWER indicator
This indicator lights green when you
turn on the digital surround processor.
POWER switch
Press to turn on and off the digital
surround processor.
3 CINEMA indicator
MUSIC indicator
EFFECT button (see page 21 for
details)
Press to select the sound field
(CINEMA/MUSIC).
4 Decode mode display (see page 23
for details)
5 PHONES jack (see page 27 for
details)
Connect your headphones to this jack.
Connect the MDR-F1 headphone (sold
separately) for optimum surround effect.
6 PHONES — LEVEL control
Turn to adjust the volume of the
headphones (sold separately) connected
to the PHONES jack.
7 OUTPUT button
Press to select the output mode (OFF/
VIRTUAL FRONT/VIRTUAL
SURROUND).
8 Infrared emitter
Set the emitter in a position so that there
is a straight, unobstructed path to the
sensor.
Preparation
(Continued)
5 GB