brondell Swash 300 Manual De Uso página 23

TROUBLESHOOTING
Problem
The bidet seat is not working
Nozzles do not function properly
Bidet wash feature does not work
or fails to spray
Possible Causes
1. Bidet not plugged in
2. No power to Swash
3. There is power, but nothing happens
when trying to use the Swash
4. Not activating body sensor
1. Washing time exceeded the cycle
time
2. Power failure
settings
1. Body sensor does not detect that
you are sitting on Swash
21
Possible Solutions
1. Press the wash button during cycle to
extend the time (see operation section for
more information about wash functions)
2. Check and reset GFI outlet
5. Adjust the water pressure settings
on the remote.
1. Adjust sitting position to fully cover
the body sensor. Overide the body
sensor (refer to special mode operation
section to unlock body seat sensor)