OPERATION
Selecting/Cancelling Eco Mode
1. Press and hold the "Rear cleansing" button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the "F
Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, Eco Mode is ON.
b. If the bell rings twice, Eco Mode is turned OFF.
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.
Selecting/Cancelling Silent Mode
1. Press and hold the "Rear cleansing" button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the "Stop"
Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, Silent Mode is ON.
b. If the bell rings twice, Silent Mode is OFF. (The seat will now make a "ding" sound
each time a button is pressed on the remote or side of seat.)
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.
4. Finally to activate your new Silent Mode settings, power the Swash 300 o then
back on again. Your new settings are now active.
Selecting/Cancelling Seat Sensor Lock Mode
1. Press and hold the "Rear cleansing" button on the side of the product and plug the seat
back into the electrical outlet. (An alarm will sound and the LED light will turn on.)
2. Press the "Rear Cleansing"
ock
Mode. Each time the button is pressed, it alternates between ON and OFF.
a. If the bell rings once, the Seat Sensor is locked ON. (Someone will need to be
sitting on the seat in order for the wash functions to work.)
b. If the bell rings twice, the Seat Sensor is turned OFF.
3. To save the setting, press the Power button on the side of the product. If no button is
pressed for 10 seconds, the setting will automatically be saved.
17
.