Edirol Canvas SD-20 Manual Del Usuario página 57

7
From the File menu, choose Open.
Open the FreeMIDI Settings folder copied in Step 1, select the file for the
name of the port to which the SD-20 is connected, and click [Open].
8
Verify that MIDI transmission and reception occur correctly.
From the MIDI menu, choose Check Connections.
9
The mouse cursor will change to the shape of a note. Click the sound
generator icons encircled in the diagram at right.
If you hear sound, MIDI messages are being sent from the Macintosh to the
SD-20.
ig.3-25
f
Does the OUTPUT level indicator of the SD-20 move?
If the OUTPUT level meter in the SD-20's display is moving but you do not
hear sound, check whether the volume of the SD-20 or your speaker system
has been lowered. If the OUTPUT level meter does not move, check the
connections and OMS settings once again.
After you have made settings correctly, choose Test once again from the
Studio menu, and perform step 9.
10
Once again choose the MIDI menu command Check Connections to end
the test.
11
From the File menu, choose Quit to exit FreeMIDI Setup.
This completes connections for the SD-20 and Macintosh, and installation of
the MIDI driver. Now, MIDI data can be input and output (recorded and
played).
Getting connected and installing drivers (Macintosh)
If the SD-20 does not
produce sound, refer to No
sound (p. 237).
57